This shouldn’t have caused the problems immediately but continually, over time it can cause some issues as you’ve no doubt read about. Refresh and Replace – If the above doesn’t fix the problem then further disassemble the gun to take a look at the main-spring. If you’re at this point then you may as well replace the spring whilst you’re here! Clean all of the internal mechanisms as best as you can, they should come up like new if you do it properly.

In the case of a vehicle without a compartment separate from the driver’s compartment, the Silent-SR™ should be contained in a locked container other than the glove compartment or console. Generally, if you legally own a suppressor, you may use it at your local range. However, your range may have rules prohibiting the use of suppressors. We recommend contacting your local range with any questions. So long as your Ruger® Carbine rifle has not been damaged by fire, immersion or corrosion, it can be refinished at our Prescott plant. The complete rifle must be sent to our Prescott Customer Service Department.

If you need help replacing a breech seal, contact ourService Department. The bottom line is this seems like a sold air rifle. I haven’t personally tried it, but I wanted to add it to the list for those of you considering a PCP air rifle. There are a number of different models you can buy, some come with the drum mag and some don’t. Some also have an adjustable stock and others do not. It comes stock with folding iron sights, but it does have a Picatinny rail system for add-ons and accessories.

Fist the broken sections on the spring are at the trigger end, not the piston end, second the clicking/grinding didn’t start for cocking until after my mistaken cock with stock off. paul sternberg houston Again, why a split in cocking rod into two sections with a joint in the middle? This makes it necessary for the wooden stock to guide the cock rod so that it remains straight.

California’s law requires that any pistol added to the roster includes microstamping technology that imprints this information in two locations on discharged cartridge cases. It can be easily defeated in mere seconds using common household tools. Criminals could also simply switch the engraved firing pin to a readily available unmarked spare part, thereby circumventing the process. To date, no firearms have been made by any manufacturer that utilizes this unproven technology.

What you are saying I read in a tech article at Pyramydair. Your experience was also confirmed by another Airhawker who replaced his scope mount with an adjustable. I was under the impression an “accu shot one piece mount” would do the trick along with the Leapers scope. The guy writing the article highly endorsed the Leapers so I figured the purchase of the one piece mount and scope would resolve the problem. Looks like I’ll have to send the mount back and get a fully adjustable one. The other day I tried zeroing the scope in after twelve shots or so but it was running wild again so I gave up.